Gecko XP2e Wet End 1.5HP* 56f (6.1" Euro Legs) Wet End Assembly (2x2)
Product Description
Box Quantity: 30. Dimensions: Length: 200 mm Width: 185 mm (main face diameter not screw holes) Depth: 140 mm. The space between the impeller plates is 10mm.
Connections: 2 inch unions. Both suction and pressure have a flat smooth connection meaning that the o'ring would be attached to the union sleeve. The wet end fixes to the pump body with 4 x small bolts, this part holds the female receptacle part of this attachment. The impeller is screwed on to the shaft which protrudes from the centre of the pump body.
Fits the older, smooth body Emerson 56 frame (6.1") pumps only. There is an identical part to this that was used with Magnetek motors which was 56 frame (6.3"). This unit includes the housing, the face plate, the face plate o-ring, the 2.5hp impeller and the ceramic seal kit. This unit also includes a built in bleed screw.
Connections: 2 inch unions. Both suction and pressure have a flat smooth connection meaning that the o'ring would be attached to the union sleeve. The wet end fixes to the pump body with 4 x small bolts, this part holds the female receptacle part of this attachment. The impeller is screwed on to the shaft which protrudes from the centre of the pump body.
Fits the older, smooth body Emerson 56 frame (6.1") pumps only. There is an identical part to this that was used with Magnetek motors which was 56 frame (6.3"). This unit includes the housing, the face plate, the face plate o-ring, the 2.5hp impeller and the ceramic seal kit. This unit also includes a built in bleed screw.
Product Attributes
| Brand: Gecko |
| Product Type: Wet End |
| HP: 1.5HP |
| Inlet Size: 2.0 inch |
| Outlet Size Reference: 2.0 inch |
| Pump Wet End Size: 56 frame |
Product Attributes
| Brand: Gecko |
| Product Type: Wet End |
| HP: 1.5HP |
| Inlet Size: 2.0 inch |
| Outlet Size Reference: 2.0 inch |
| Pump Wet End Size: 56 frame |
Product Description
Box Quantity: 30. Dimensions: Length: 200 mm Width: 185 mm (main face diameter not screw holes) Depth: 140 mm. The space between the impeller plates is 10mm.
Connections: 2 inch unions. Both suction and pressure have a flat smooth connection meaning that the o'ring would be attached to the union sleeve. The wet end fixes to the pump body with 4 x small bolts, this part holds the female receptacle part of this attachment. The impeller is screwed on to the shaft which protrudes from the centre of the pump body.
Fits the older, smooth body Emerson 56 frame (6.1") pumps only. There is an identical part to this that was used with Magnetek motors which was 56 frame (6.3"). This unit includes the housing, the face plate, the face plate o-ring, the 2.5hp impeller and the ceramic seal kit. This unit also includes a built in bleed screw.
Connections: 2 inch unions. Both suction and pressure have a flat smooth connection meaning that the o'ring would be attached to the union sleeve. The wet end fixes to the pump body with 4 x small bolts, this part holds the female receptacle part of this attachment. The impeller is screwed on to the shaft which protrudes from the centre of the pump body.
Fits the older, smooth body Emerson 56 frame (6.1") pumps only. There is an identical part to this that was used with Magnetek motors which was 56 frame (6.3"). This unit includes the housing, the face plate, the face plate o-ring, the 2.5hp impeller and the ceramic seal kit. This unit also includes a built in bleed screw.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.