(Pack 5.2) Balboa GS523DZ + TS-VL802.(ALTERNATIVE PRODUCT: PK-VP610)
Product Description
Box Quantity: 1. Dimensions: Length: 500 mm (inc heater) 320 mm (box only) Width: 120 mm Height: 270 mm Topside: 265 mm x 117 mm
Volts: 230vac Hz: 50 Amps: 16A or 32A
Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: Single speed
Pump 3: Single speed
Air Blower: x 1 (optional)
Heater: x 1 (3KW)
Ozone: x 1 Light: x1, 12 volt
Radio, TV/AV: Point available
Compatible With: Any retrofit system, suitable for upgrades
Connections: 2-inch socket heater union sleeves. Amp cables plug into the PCB to operate the components.
Topside Buttons: TIME, MODE, WARM, COOL, BLOWER, LIGHT, JETS 1 and JETS 2 (Jets 2 button operates pump 2 and pump 3 individually, keep pressing the button to cycle through).
Items Included: Balboa GS523DZ control box and Balboa VL802D topside control (CABLES NOT INCLUDED)
The M7 technology means you do not need to have sensors and flow switches going back into the tub as everything is done inside the control box by 2 sensors.
This deluxe Touch Pad or Topside control allows you to set your preferred filter times by a built-in clock. Its large screen also gives you detailed information about the operation of the Hot Tub and symbols display when the individual components are running. This system also displays when it is in a filter cycle and you can read the time from it also.
*SPECIAL NOTE* J17 IS A PORT THAT ALLOWS YOU TO RUN EITHER AN AIR BLOWER OR ANOTHER SINGLE SPEED PUMP. THE PORT IS PROTECTED BY A 10 AMP QUICK BLOW FUSE.
SOMETIMES YOU MADE NEED LONGER CABLES TO CONNECT THE TOUCH PAD AND PUMPS THESE CAN BE FOUND IN THE RELATED ITEMS BELOW THE PART NUMBERS ARE:- CA-AM301 AND TS-EXS25
Volts: 230vac Hz: 50 Amps: 16A or 32A
Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: Single speed
Pump 3: Single speed
Air Blower: x 1 (optional)
Heater: x 1 (3KW)
Ozone: x 1 Light: x1, 12 volt
Radio, TV/AV: Point available
Compatible With: Any retrofit system, suitable for upgrades
Connections: 2-inch socket heater union sleeves. Amp cables plug into the PCB to operate the components.
Topside Buttons: TIME, MODE, WARM, COOL, BLOWER, LIGHT, JETS 1 and JETS 2 (Jets 2 button operates pump 2 and pump 3 individually, keep pressing the button to cycle through).
Items Included: Balboa GS523DZ control box and Balboa VL802D topside control (CABLES NOT INCLUDED)
The M7 technology means you do not need to have sensors and flow switches going back into the tub as everything is done inside the control box by 2 sensors.
This deluxe Touch Pad or Topside control allows you to set your preferred filter times by a built-in clock. Its large screen also gives you detailed information about the operation of the Hot Tub and symbols display when the individual components are running. This system also displays when it is in a filter cycle and you can read the time from it also.
*SPECIAL NOTE* J17 IS A PORT THAT ALLOWS YOU TO RUN EITHER AN AIR BLOWER OR ANOTHER SINGLE SPEED PUMP. THE PORT IS PROTECTED BY A 10 AMP QUICK BLOW FUSE.
SOMETIMES YOU MADE NEED LONGER CABLES TO CONNECT THE TOUCH PAD AND PUMPS THESE CAN BE FOUND IN THE RELATED ITEMS BELOW THE PART NUMBERS ARE:- CA-AM301 AND TS-EXS25
Product Attributes
| Brand: Balboa |
| Product Type: Box and Panel Combo |
| Max Length: 420mm |
| Max Height: 270mm |
| Max Pumps: 3 |
| Power kW: 3.0kW |
| Circ Pump: Yes |
| Blower: Yes |
| Max Depth: 100mm |
| Total Comp. Relays: 5 |
| Heater Size: 2 Inch |
Product Attributes
| Brand: Balboa |
| Product Type: Box and Panel Combo |
| Max Length: 420mm |
| Max Height: 270mm |
| Max Pumps: 3 |
| Power kW: 3.0kW |
| Circ Pump: Yes |
| Blower: Yes |
| Max Depth: 100mm |
| Total Comp. Relays: 5 |
| Heater Size: 2 Inch |
Product Description
Box Quantity: 1. Dimensions: Length: 500 mm (inc heater) 320 mm (box only) Width: 120 mm Height: 270 mm Topside: 265 mm x 117 mm
Volts: 230vac Hz: 50 Amps: 16A or 32A
Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: Single speed
Pump 3: Single speed
Air Blower: x 1 (optional)
Heater: x 1 (3KW)
Ozone: x 1 Light: x1, 12 volt
Radio, TV/AV: Point available
Compatible With: Any retrofit system, suitable for upgrades
Connections: 2-inch socket heater union sleeves. Amp cables plug into the PCB to operate the components.
Topside Buttons: TIME, MODE, WARM, COOL, BLOWER, LIGHT, JETS 1 and JETS 2 (Jets 2 button operates pump 2 and pump 3 individually, keep pressing the button to cycle through).
Items Included: Balboa GS523DZ control box and Balboa VL802D topside control (CABLES NOT INCLUDED)
The M7 technology means you do not need to have sensors and flow switches going back into the tub as everything is done inside the control box by 2 sensors.
This deluxe Touch Pad or Topside control allows you to set your preferred filter times by a built-in clock. Its large screen also gives you detailed information about the operation of the Hot Tub and symbols display when the individual components are running. This system also displays when it is in a filter cycle and you can read the time from it also.
*SPECIAL NOTE* J17 IS A PORT THAT ALLOWS YOU TO RUN EITHER AN AIR BLOWER OR ANOTHER SINGLE SPEED PUMP. THE PORT IS PROTECTED BY A 10 AMP QUICK BLOW FUSE.
SOMETIMES YOU MADE NEED LONGER CABLES TO CONNECT THE TOUCH PAD AND PUMPS THESE CAN BE FOUND IN THE RELATED ITEMS BELOW THE PART NUMBERS ARE:- CA-AM301 AND TS-EXS25
Volts: 230vac Hz: 50 Amps: 16A or 32A
Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: Single speed
Pump 3: Single speed
Air Blower: x 1 (optional)
Heater: x 1 (3KW)
Ozone: x 1 Light: x1, 12 volt
Radio, TV/AV: Point available
Compatible With: Any retrofit system, suitable for upgrades
Connections: 2-inch socket heater union sleeves. Amp cables plug into the PCB to operate the components.
Topside Buttons: TIME, MODE, WARM, COOL, BLOWER, LIGHT, JETS 1 and JETS 2 (Jets 2 button operates pump 2 and pump 3 individually, keep pressing the button to cycle through).
Items Included: Balboa GS523DZ control box and Balboa VL802D topside control (CABLES NOT INCLUDED)
The M7 technology means you do not need to have sensors and flow switches going back into the tub as everything is done inside the control box by 2 sensors.
This deluxe Touch Pad or Topside control allows you to set your preferred filter times by a built-in clock. Its large screen also gives you detailed information about the operation of the Hot Tub and symbols display when the individual components are running. This system also displays when it is in a filter cycle and you can read the time from it also.
*SPECIAL NOTE* J17 IS A PORT THAT ALLOWS YOU TO RUN EITHER AN AIR BLOWER OR ANOTHER SINGLE SPEED PUMP. THE PORT IS PROTECTED BY A 10 AMP QUICK BLOW FUSE.
SOMETIMES YOU MADE NEED LONGER CABLES TO CONNECT THE TOUCH PAD AND PUMPS THESE CAN BE FOUND IN THE RELATED ITEMS BELOW THE PART NUMBERS ARE:- CA-AM301 AND TS-EXS25
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.