1. All Products
  2. Heating
  3. 3kw Vita Spa Flow Thru Heater C2300-0010ET
Heating

3kw Vita Spa Flow Thru Heater C2300-0010ET

https://spaparts.glodo.cloud/web/image/product.template/1539/image_1920?unique=a0df8bc

Not Available For Sale

  • Brand
  • Product Type
  • Power kW
  • Tube Diameter Reference
  • Tube Length
  • Assembled Length
  • Element Material

This combination does not exist.

Contact Us
  • VISA
  • Mastercard
  • Paypal
  • Google Pay
  • Apple Pay
Product Description
Box Quantity: 5 Power: Volts: 230 Hz: 50 KW: 3.0 Specifications: Material spec: Incoloy Required flow rate: Set by pressure switch Flow detection: No pressure switch supplied with the heater Compatible With: Hot Tubs: Vita Spas. Part Codes: C2300-0010ET Connections & Fixings: Usually held in with a metal fixing studs at the top of the heater either side of the main heat terminals. Hi-limit sensor pouch on the topside. 2 inches white plastic female sockets to connect to plumbing Dimensions: Length: 444.5 mm Diameter: 50.8 mm Between terminals: 31.75 mm Additional Notes: Can be used to replace HT-TH21U (C2300-1008ET) You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Thermcore, Aquatemp or Balboa product with genuine labelling do not buy it. If your heater looks the same as this one it most probably is but contact us if you need further help.
Product Attributes
Brand: Vita Spa
Product Type: Common Heater Tube
Power kW: 3.0kW
Tube Diameter Reference: 2 inch
Tube Length: 365mm
Assembled Length: 480mm
Element Material: Incoloy
Product Attributes
Brand: Vita Spa
Product Type: Common Heater Tube
Power kW: 3.0kW
Tube Diameter Reference: 2 inch
Tube Length: 365mm
Assembled Length: 480mm
Element Material: Incoloy
Product Description
Box Quantity: 5 Power: Volts: 230 Hz: 50 KW: 3.0 Specifications: Material spec: Incoloy Required flow rate: Set by pressure switch Flow detection: No pressure switch supplied with the heater Compatible With: Hot Tubs: Vita Spas. Part Codes: C2300-0010ET Connections & Fixings: Usually held in with a metal fixing studs at the top of the heater either side of the main heat terminals. Hi-limit sensor pouch on the topside. 2 inches white plastic female sockets to connect to plumbing Dimensions: Length: 444.5 mm Diameter: 50.8 mm Between terminals: 31.75 mm Additional Notes: Can be used to replace HT-TH21U (C2300-1008ET) You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Thermcore, Aquatemp or Balboa product with genuine labelling do not buy it. If your heater looks the same as this one it most probably is but contact us if you need further help.