50-63 mfd Start Capacitor
Product Description
450 vac. Main body length: 100 mm (without cap), 120 mm (including cap). Diameter: 50 mm.
Rear fixing stud: 7 mm with nut. Two flat spade connections to connect wires from the pump. The capacitor is supplied with a Velcro strip; if it is slightly too big, you can mount it on the outside of the pump housing and feed the wires through the end cap. Commonly used in Emerson smooth body pumps as well as Aquaflo models.
Rear fixing stud: 7 mm with nut. Two flat spade connections to connect wires from the pump. The capacitor is supplied with a Velcro strip; if it is slightly too big, you can mount it on the outside of the pump housing and feed the wires through the end cap. Commonly used in Emerson smooth body pumps as well as Aquaflo models.
Product Attributes
| Brand: Remco |
| Length: 100mm |
| Power: 50-63mfd |
| Width: 50 mm |
Product Attributes
| Brand: Remco |
| Length: 100mm |
| Power: 50-63mfd |
| Width: 50 mm |
Product Description
450 vac. Main body length: 100 mm (without cap), 120 mm (including cap). Diameter: 50 mm.
Rear fixing stud: 7 mm with nut. Two flat spade connections to connect wires from the pump. The capacitor is supplied with a Velcro strip; if it is slightly too big, you can mount it on the outside of the pump housing and feed the wires through the end cap. Commonly used in Emerson smooth body pumps as well as Aquaflo models.
Rear fixing stud: 7 mm with nut. Two flat spade connections to connect wires from the pump. The capacitor is supplied with a Velcro strip; if it is slightly too big, you can mount it on the outside of the pump housing and feed the wires through the end cap. Commonly used in Emerson smooth body pumps as well as Aquaflo models.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.