1. All Products
  2. Balboa GS510SZ PCB
All Products

Balboa GS510SZ PCB

https://spaparts.glodo.cloud/web/image/product.template/175/image_1920?unique=a0df8bc

Not Available For Sale

  • Brand
  • Product Type
  • Length
  • Width
  • Model / Series
  • Circ Pump
  • No. of Pumps
  • Blower

This combination does not exist.

Contact Us
  • VISA
  • Mastercard
  • Paypal
  • Google Pay
  • Apple Pay
Product Description
Box Quantity: 1. Dimensions: Length: 280 mm Height: 130 mm

Volts: 230 Hz: 50
Pump 1: Single or dual speed + circulation pump if required
Pump 2: Single speed
Pump 3: N/A
Air Blower: Yes (optional)
Heater: Yes
Ozone: Yes
Light: 12 volt
Sensor style: M7 x 2
Pressure Switch: No
Compatible With: GS510SZ control box. Topside controls from the serial standard VL range such as the VL700S and the VL701S. Commonly used with Spaform amongst others. Replaces old board 53642 GS510S.

This PCB is used as a replacement for an existing GS510SZ control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.

*SPECIAL NOTE* J17 IS A PORT THAT ALLOWS YOU TO RUN EITHER AN AIR BLOWER OR ANOTHER SINGLE SPEED PUMP. THE PORT IS PROTECTED BY A 10 AMP QUICK BLOW FUSE.
Product Attributes
Brand: Balboa
Product Type: PCB
Length: 280mm
Width: 130mm
Model / Series: GS
Circ Pump: Yes
No. of Pumps: 2
Blower: Yes
Product Attributes
Brand: Balboa
Product Type: PCB
Length: 280mm
Width: 130mm
Model / Series: GS
Circ Pump: Yes
No. of Pumps: 2
Blower: Yes
Product Description
Box Quantity: 1. Dimensions: Length: 280 mm Height: 130 mm

Volts: 230 Hz: 50
Pump 1: Single or dual speed + circulation pump if required
Pump 2: Single speed
Pump 3: N/A
Air Blower: Yes (optional)
Heater: Yes
Ozone: Yes
Light: 12 volt
Sensor style: M7 x 2
Pressure Switch: No
Compatible With: GS510SZ control box. Topside controls from the serial standard VL range such as the VL700S and the VL701S. Commonly used with Spaform amongst others. Replaces old board 53642 GS510S.

This PCB is used as a replacement for an existing GS510SZ control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.

*SPECIAL NOTE* J17 IS A PORT THAT ALLOWS YOU TO RUN EITHER AN AIR BLOWER OR ANOTHER SINGLE SPEED PUMP. THE PORT IS PROTECTED BY A 10 AMP QUICK BLOW FUSE.